Tuesday 12 June 2012

Install and Use DreamScene in Vista Ultimate

Windows DreamScene is a Windows Ultimate Extra. With Windows DreamScene, you can change your desktop background to a video clip, which runs in a continuous loop. You can now have a animated desktop instead of just a plain wallpaper image.

  • Windows DreamScene supports only WMV and MPG video file formats. To use Windows DreamScene, you must be running Vista Ultimate, download Windows DreamScene as an Ultimate Extra, and use a video card that can support the Windows Aero color scheme
  • If you do not use the Windows Aero color scheme, then the DreamScene will not be animated.
  • The Dreamscene folder for Dream files is located at: C:\Windows\Web\Windows DreamScene.

Install DreamScene

1. Open the Control Panel (Classic View).

2. Click on Windows Update.

3. Click on Check for updates in the upper right corner. (See screenshot below)
NOTE: This may take a moment to finish.

4. Under Windows Ultimate Extras, click on View available Extras.
updates1.jpg
5. Check Windows DreamScene, and then click Install. (See screenshot below)

dreamscene_update.jpg
6. When Windows DreamScene is finished installing, click on Restart Now. (See screenshot below)
restart.jpg
7. After the computer has restarted, go back and repeat steps 1 to 4 again.
NOTE: This is to download the Windows DreamScene Content Packs.

8. Check Windows Dreamscene Content Pack and Windows Dreamscene Content Pack Favorites, then click Install. (See screenshot below)
NOTE: No restart is necessary for these two.

9. When they are finished installing, close the Windows Update window.
dreamscene_update2.jpg
10. After installation, you will notice that when you right click on the desktop, there is a new menu option. 
(See screenshot below)
A) Pause DreamScene - This will pause a Windows DreamScene desktop background.

B) Play DreamScene - This will unpause the Dreamscene from above to allow it to play again.
Name:  Play_Pause_DreamScene.jpg Views: 31215 Size:  8.3 KB
Change DreamScene Desktop Background

1. Right click on a empty area of your desktop and click on Personalize. (See screenshot below)
Name:  Right_Click.jpg Views: 31225 Size:  8.6 KB
2. Click on Desktop Background. (See screenshot below)
desktop_background.jpg
3. Click on the Location drop down list, and then click on Windows DreamScene Content. (See screenshot below)
Name:  Drop_Down.jpg Views: 31256 Size:  10.5 KB
4. Select a DreamScene (video) you want on your desktop background. (See screenshot below).

5. Click on OK to select the highlighted DreamScene.
Click this bar to view the full image.

Adjust the DreamScene Volume Level




1. Have a DreamScene selected from STEP TWO above and have it running. 

2. Right-click the white Volume speaker icon in the Notification Area. (see screenshot below)

3. Click on Open Volume Mixer.

Name:  Sound_Icon.jpg Views: 29648 Size:  7.7 KB
4. Under Windows DreamScene - (See screenshot below)
A) Under the slider control, click on the speaker button to enable and disable the Dreamscene sound.

B) Slide the slider control up or down to set the volume level you want for the DreamScene.
Name:  Volume_Mixer.jpg Views: 30903 Size:  52.0 KB
5. Close the Volume Mixer window.


Set Windows 7 Menus to Open to the Left or Right Side


1. To Have Menus Open to the Left  Download Left.reg


2. To Have Menus Open to the Right  Download Right.reg


3. Right click on the downloaded .reg file and click on Merge.

4. Click on Run, Yes, Yes, and OK when prompted.

5. Log off and log on, or restart the computer to apply.

Friday 18 May 2012

Remove Viruses or Malware Using command prompt “attrib”


“attrib” is a very useful tool to check if your pen drives  have been infected by a virus. The ”attrib” is used to set and remove file attributes (read-only, archive,system and hidden).
  1. +s  :- means it is a system file and you cannot delete it just by using the delete command.
  2. +h  :- means it is hidden. so, you cannot delete it.
  3. +r  :- means it is a read only file.so,  you cannot delete it just by using the delete command.
Now we need to set the attributes for example we set  attributes of autorun.inf   to -s -h -r . so, we can manually delete it.
  1. Go to Start Menu > Run.
  2. Type cmd  & Press Enter.
  3. Type attrib -s -h -r autorun.inf ( be sure to include -s -h -r because you cannot change the attributes using only -s or -h or -r alone).
  4. If the autorun.inf file has no more attributes, you can now delete it by typing del autorun.inf .
In case when the all folders in pen drive or hard drive affected by viruses and converted into application which has size of some KB then you can recover those all folders and sub folders using single command.
  1. Go to Start Menu > Run.
  2. Type cmd  & Press Enter.
  3. K: &  Press Enter  ( ‘K’  is  your removable drive ).
  4. K:\>attrib -H -S \*.* /S /D  &  Press Enter.
That’s it …

Wednesday 11 April 2012

Quick Heal Total Security Use For Free


  1. Install quick heal 2012 trial version and register for 30 days trial period.
  2. After 30 days uninstall quick heal and run Quick Heal Removal for  X64 or X32. (Password : darpan223)
  3. It will remove registry entry of your previous installation.
  4. After restarting your PC you can again use 30 days trial.
  5. This can be done Unlimited Time and you can use quick heal trial many times. 

Wednesday 21 March 2012

Add Top Menu Bar to Any Blogger Templet

  1. Go To your Blogger Dashboard, Layout >> Edit HTML >> And find This code : " </b:skin> " .
  2. And After it add  This code.
  3. That’s it, and now let’s add the menu it self to our template.
  4. Go To your Blogger Dashboard, Layout >> Page Elements >> and now above blog posts area, click add gadget  And choose Add HTML/JavaScript.
  5. Leave the title empty and at the content area add This code.
  6. Now Click Save and check your blog.
  7. Now you have to change the menu links for your own links and titles, and you can change themenu colors as well.
  8. change The symbol  "# " to your link, and change the word  " Edit "  to your title.
  9. you can repeat this part of code as you like,every time you add this part of code again to your menu code, a new link will be added to your menu.